Mempercepatkan Loading Windows Xp

[Geekspro 0]

aku dah pernah buat dulu kat regedit tapi dah tak ingat la cara dia...ade sesape yang ingat tak??

[rokhyui 0]

meh aku bgtau

HKEY_LOCAL_MACHINE -> SYSTEM -> CurrentControlSet -> Control -> SessionManager -> MemoryManagement -> PrefetchParameters.

kat preftech parameter ubah dari 3 ke 5

tapi ada gak dari 2, ubah tkar 5

biasa di cut separuh dari asal

selamat mencuba

[zippo 0]

When you start up your computer and you are connected to a LAN and your computer is set to DHCP and your computer has to search for the DHCP server and then request and IP address and all other configuration. This process takes up some time and slows down the time it takes to boot the computer up. Following the directions below will help your set a static IP address. Even if your ISP says to use DHCP this tweak may still work for you, but you are warnned!

Click Start and click on Run.

Type command in the text box and click OK.

In DOS, type ipconfig and hit enter.

This will show you your current IPs that your NIC and PPPoE adapters have. Only pay attention to your Ethernet Card Adapter, not to the PPP adapter.

Next, right click My Network Places and select Properties from the drop down menu. This will open up the Network Connections window. In here, locate your Local Area Network connection and right click it, select Properties from the drop down menu.

When the next Window that opens up, select Internet Protocol (TCP/IP) and click Properties at the bottom.

In the next window, click 'Use the following IP Address'. This is where that DOS window comes in handy. Copy the same exact IP Address from your Ethernet card (in the dos window) and place it where it says IP Address. Same goes for the Subnet Mask and Default Gateway. If your Default Gateway is blank, then just leave it blank. Click Ok, then Ok again.

In the DOS window type exit dos then enter. Reboot your machine.

Now there is absolutely NO loading. You can connect as soon as you see your desktop.

Quick Note: If you use DHCP (Dynamic IP Address) to connect to the net, you may find that your net connection does not work after this. So if some day your network connection stops working, just go back into the NIC card properties and select automatically get IP address and reboot.

Ni cara yg aku dapat. Leh share sama sama kat sini.

Edited October 24, 2007 by zippo

[agas 0]

Pc aku yg pentium3 punya loading progress bar ade 16 kali.. pakai soft Bootvis tu.. jadi 12 bar je.. ;(

[MNS 0]

tengah cuba ni. Kat mana nak dapat informasi asas baerkaitan regedit. wa pernah dengo tapi tak tau fungsi dan cara nak guna.

[atobey 0]

meh aku bgtau

HKEY_LOCAL_MACHINE -> SYSTEM -> CurrentControlSet -> Control -> SessionManager -> MemoryManagement -> PrefetchParameters.

kat preftech parameter ubah dari 3 ke 5

tapi ada gak dari 2, ubah tkar 5

biasa di cut separuh dari asal

selamat mencuba

____________________________________________________________________________________

oit,tak leh pun..sampai prefetchParameter tu,nak select tang mana...aku select yg tepi2 tu,suma no decimal hapa ntah..

tukar kat "EnablePrefetcher" ka?

[xmatrempit 0]

Cuba try test yang ni : Windows XP sahaja

Control Panel>Power Options>Advanced

When i pressed the power button on my computer - <default> power off

Tukarkan 'power off' kepada 'hybernate'

Tekan on/off power button pc anda. Windows akan hybernate system anda dan terus shutdown.

On kan pc anda dan anda akan dapat membuka windows dengan kelajuan cahaya

selamat mencuba

p/s

1. sekiranya anda shutdown seperti biasa hybernating tidak akan berlaku. ia hanya berlaku sekiranya anda offkan button pc anda secara manual.

2. hanya boleh dilakukan oleh sistem atx dan kebanyakkan pc sekarang menggunakan atx power supply.

Edited October 25, 2007 by AhliNujum

[zippo 0]

meh aku bgtau

HKEY_LOCAL_MACHINE -> SYSTEM -> CurrentControlSet -> Control -> SessionManager -> MemoryManagement -> PrefetchParameters.

kat preftech parameter ubah dari 3 ke 5

tapi ada gak dari 2, ubah tkar 5

biasa di cut separuh dari asal

selamat mencuba

aku ada cuba cara ko, masa nak shut down problem. lambat giler, bila nak on memang laju. memang cam gitu ker ataupun ada conflict yg berlaku? leh terangkan?

[rokhyui 0]

tukar kat enable preftech 2 jadi 5

aku punya tak pun

tapi ada cara untuk lajukan shutdown gak

nak ker??

nak aku leh ajar dalam regedit

[flizgreen 0]

lorrr....gtau je la..mesti ader yg nak tau nyerrr..kalo ble lajukan shutdown tur jadik 3saat jerk...kalo startup aku xkesah sgt kalo lambat...sbb aku ske tgk aku nyer boot skin..masa tula nak kasik show off boot skin kt member huhuhuh

[Geekspro 0]

Cuba try test yang ni : Windows XP sahaja

Control Panel>Power Options>Advanced

When i pressed the power button on my computer - <default> power off

Tukarkan 'power off' kepada 'hybernate'

Tekan on/off power button pc anda. Windows akan hybernate system anda dan terus shutdown.

On kan pc anda dan anda akan dapat membuka windows dengan kelajuan cahaya

selamat mencuba

p/s

1. sekiranya anda shutdown seperti biasa hybernating tidak akan berlaku. ia hanya berlaku sekiranya anda offkan button pc anda secara manual.

2. hanya boleh dilakukan oleh sistem atx dan kebanyakkan pc sekarang menggunakan atx power supply.

Knape kat bahgian yg aku boldkan kat atas kat PC aku x de plak option hybernate ni...

[qazzaq 0]

(xvolution: Knape kat bahgian yg aku boldkan kat atas kat PC aku x de plak option hybernate ni...)

Hang kena enable kan dulu fungsi hibernate tu baru dia boleh berfungsi... pegi dekat control panel,

amik power option, haa, lepas tu hang cari la dalam tu bab hibernate...

Bootvis OK... dan korang boleh jugak cuba try nih,

tips yg saya copy dari web mana pun dah lupa... so

tak dapat nak bagi credit kat writer dia

Do at your own risk, setakat yg saya buat ok aje!

Jgn lupa copy paste tips ni, simpan la dlm pendrive korang, senang tak yah

nak cari2 lain kali... SO here we go...

1. DISABLE INDEXING SERVICES

Indexing Services is a small little program that uses large amounts of RAM and can often make a computer endlessly loud and noisy. This system process indexes and updates lists of all the files that are on your computer. It does this so that when you do a search for something on your computer, it will search faster by scanning the index lists. If you don’t search your computer often, or even if you do search often, this system service is completely unnecessary. To disable do the following:

1. Go to Start

2. Click Settings

3. Click Control Panel

4. Double-click Add/Remove Programs

5. Click the Add/Remove Window Components

6. Uncheck the Indexing services

7. Click Next

2. OPTIMISE DISPLAY SETTINGS

Windows XP can look sexy but displaying all the visual items can waste system resources. To optimise:

1. Go to Start

2. Click Settings

3. Click Control Panel

4. Click System

5. Click Advanced tab

6. In the Performance tab click Settings

7. Leave only the following ticked:

- Show shadows under menus

- Show shadows under mouse pointer

- Show translucent selection rectangle

- Use drop shadows for icons labels on the desktop

- Use visual styles on windows and buttons

3. SPEEDUP FOLDER BROWSING

You may have noticed that everytime you open my computer to browse folders that there is a slight delay. This is because Windows XP automatically searches for network files and printers everytime you open Windows Explorer. To fix this and to increase browsing significantly:

1. Open My Computer

2. Click on Tools menu

3. Click on Folder Options

4. Click on the View tab.

5. Uncheck the Automatically search for network folders and printers check box

6. Click Apply

7. Click Ok

8. Reboot your computer

4. IMPROVE MEMORY USAGE

Cacheman Improves the performance of your computer by optimizing the disk cache, memory and a number of other settings.

NOTE: This program is shareware and some features require activation.

Once Installed:

1.Go to Show Wizard and select All

2.Run all the wizards by selecting Next or Finished until you are back to the main menu. Use the defaults unless you know exactly what you are doing.

3.Exit and Save Cacheman

4.Restart Windows

5. OPTIMISE YOUR INTERNET CONNECTION

There are lots of ways to do this but by far the easiest is to run TCP/IP Optimizer.

1. Download and install

2. Click the General Settings tab and select your Connection Speed (Kbps)

3. Click Network Adapter and choose the interface you use to connect to the Internet

4. Check Optimal Settings then Apply

5. Reboot

6. OPTIMISE YOUR PAGEFILE

If you give your pagefile a fixed size it saves the operating system from needing to resize the page file.

1. Right click on My Computer and select Properties

2. Select the Advanced tab

3. Under Performance choose the Settings button

4. Select the Advanced tab again and under Virtual Memory select Change

5. Highlight the drive containing your page file and make the initial Size of the file the same as the Maximum Size of the file.

Windows XP sizes the page file to about 1.5X the amount of actual physical memory by default. While this is good for systems with smaller amounts of memory (under 512MB) it is unlikely that a typical XP desktop system will ever need 1.5 X 512MB or more of virtual memory. If you have less than 512MB of memory, leave the page file at its default size. If you have 512MB or more, change the ratio to 1:1 page file size to physical memory size.

7. SPEEDUP FOLDER ACCESS - DISABLE LAST ACCESS UPDATE

If you have a lot of folders and subdirectories on your computer, when you access a directory XP wastes a lot of time updating the time stamp showing the last access time for that directory and for ALL sub directories. To stop XP doing this you need to edit the registry. If you are uncomfortable doing this then please do not attempt.

1. Go to Start and then Run and type “regeditâ€

2. Click through the file system until you get to “HKEY_LOCAL_MACHINE\ System\CurrentControlSet\Control\FileSystemâ€

3. Right-click in a blank area of the window on the right and select ‘DWORD Value’

4. Create a new DWORD Value called ‘NtfsDisableLastAccessUpdate’

5. Then Right click on the new value and select ‘Modify’

6. Change the Value Data to ‘1′

7. Click ‘OK’

8. MAKE YOUR MENUS LOAD FASTER

This is one of my favourite tweaks as it makes a huge difference to how fast your machine will ‘feel’. What this tweak does is remove the slight delay between clicking on a menu and XP displaying the menu.

1. Go to Start then Run

2. Type ‘Regedit’ then click ‘Ok’

3. Find “HKEY_CURRENT_USER\Control Panel\Desktop\â€

4. Select “MenuShowDelayâ€

5. Right click and select “Modify’

6. Reduce the number to around “100″

7. This is the delay time before a menu is opened. You can set it to “0″ but it can make windows really hard to use as menus will open if you just look at them - well move your mouse over them anyway. I tend to go for anywhere between 50-150 depending on my mood

9. IMPROVE XP SHUTDOWN SPEED

This tweak reduces the time XP waits before automatically closing any running programs when you give it the command to shutdown.

1. Go to Start then select Run

2. Type ‘Regedit’ and click ok

3. Find ‘HKEY_CURRENT_USER\ Control Panel\Desktop\’

4. Select ‘WaitToKillAppTimeout’

5. Right click and select ‘Modify’

6. Change the value to ‘1000′

7. Click ‘OK’

8. Now select ‘HungAppTimeout’

9. Right click and select ‘Modify’

10. Change the value to ‘1000′

11. Click ‘OK’

12. Now find ‘HKEY_USERS\ .DEFAULT\Control Panel\Desktop’

13. Select ‘WaitToKillAppTimeout’

14. Right click and select ‘Modify’

15. Change the value to ‘1000′

16. Click ‘OK’

17. Now find ‘HKEY_LOCAL_MACHINE\ System\CurrentControlSet\Control\’

18. Select ‘WaitToKillServiceTimeout’

19. Right click and select ‘Modify’

20. Change the value to ‘1000′

21. Click ‘OK’

9. IMPROVE SWAPFILE PERFORMANCE

If you have more than 256MB of RAM this tweak will considerably improve your performance. It basically makes sure that your PC uses every last drop of memory (faster than swap file) before it starts using the swap file.

1. Go to Start then Run

2. Type “msconfig.exe†then ok

3. Click on the System.ini tab

4. Expand the 386enh tab by clicking on the plus sign

5. Click on new then in the blank box typeâ€ConservativeSwapfileUsage=1″

6. Click OK

7. Restart PC

10. ENSURE XP IS USING DMA MODE

XP enables DMA for Hard-Drives and CD-Roms by default on most ATA or ATAPI (IDE) devices. However, sometimes computers switch to PIO mode which is slower for data transfer - a typical reason is because of a virus. To ensure that your machine is using DMA:

1. Open ‘Device Manager’

2. Double-click ‘IDE ATA/ATAPI Controllers’

3. Right-click ‘Primary Channel’ and select ‘Properties’ and then ‘Advanced Settings’

4. In the ‘Current Transfer Mode’ drop-down box, select ‘DMA if Available’ if the current setting is ‘PIO Only’

Edited October 26, 2007 by qazzaq

[xmatrempit 0]

Knape kat bahgian yg aku boldkan kat atas kat PC aku x de plak option hybernate ni...

Setengah XP setting dia tak sama bukannya Control Panel>Power Options>Advanced>Hybernate

tetapi Control Panel>Power Options>Hybernate.

Cuba semak balik(help/search - hybernate), kot-kot ada yang terlepas..

[TonikCapGajah2013 175]

tp file nie akan create file kat registry kaa??blh ganggu sistem tk??yerklaa boot login kan bersangkut paut dgn system registry gak...

Bootvis ada ubah setting dalam reg file, tapi tak ganggu PC, sebab fungsi dia mengoptimakan boot PC. Ada baiknya buat backup terlebih dahulu.

software yg dicadangkan tu compatible tak dgn vista.... home/business/ultimate...

ada sesapa pernah cuba..

tq..

Tak boleh run dalam Vista. (kalau sapa-sapa ada version untuk vista tolong bagitau)

bukan leh ubah jer kat registry ke

ubah kat session manager, memory management, preftech parameter ubah dari 3 ke 5

Sebagai tambahan jika cara bootvis masih tidak berkesan boleh guna software lain atau ubah reg. secara manual.

Tak ada masalah.

Tip yang diberikan oleh qazzaq sebenarnya bukan untuk mempercepatkan loading windowss tetapi untuk mengoptimakan PC ketika menggunakan windows XP. Tip tu OK.

10Q

[rokhyui 0]

maklumat yg tepat u gazzaq

simpan

tapi kena pandai guna

risiko tanggung sendiri

[sandwraith92 0]

lepas install beley buang kan bende alah nie?

[zippo 0]

tukar kat enable preftech 2 jadi 5

aku punya tak pun

tapi ada cara untuk lajukan shutdown gak

nak ker??

nak aku leh ajar dalam regedit

cam mana caranyer? leh kasik step by step?

[jukiey 0]

sy telah install dlm win vista, xleh buka. camna nk uninstall ek? aduhhh...

[TonikCapGajah2013 175]

kan saya dah beritahu kat atas tu tak boleh run dalam vista.

Buka Control Panel > Programs & Features

[rokhyui 0]

cam mana caranyer? leh kasik step by step?

gazaq ada bgtau dah camana nak shutdown bg laju. tgk balik post erk

[TonikCapGajah2013 175]

satu lagi program yang bagus dan boleh mempercepatkan proses boot:

Windows Doctor:

http://www.windowsdoctor.com/

Download:

http://www.windowsdoctor.com/Download.htm

Edited November 3, 2007 by PowerRootTongkatAli_GS

[arashidi 0]

dah try, ada sikit improvement.. !!!

[madaya 0]

klu guna WinASO Registry Optimizer pun bole gak...

[TonikCapGajah2013 175]

klu guna WinASO Registry Optimizer pun bole gak...

WinASO pun boleh.

Kena guna salah satu sebab ada konflik antara WinDoc dengan WinASO

[Balthazor 1]

kan saya dah beritahu kat atas tu tak boleh run dalam vista.

Buka Control Panel > Programs & Features

bro..............kalau right click>propeties>Compatibiliti>Win XP x leh ke????????????????????

ada satu cara `kejam` caranya

1) Start>RUN

2)C:>Windows

3)Locate Prefetch folders

4)apa yg didalam folder pefetch Folder tuh leh padam