Jump to content
Sign in to follow this  
Navigator®

Setting Modem Zxdsl 831 Jadi Router

Recommended Posts

OK aku dah study aku pon dah setting dah

ok camnih aku tunjukkan manual nye

kat mula mula Quick setup

vpi=0

vci=35

Pastu

protocal=pppoe

click on next

obtain an ip automatically

enable nat

Pastu lak

ppp username=your streamyx user name@streamyx

ppp password=streamyx password

session established=always on

then

Primary IP Address: 192.168.1.1

Subnet Mask: 255.255.255.0

Host Name: ZXDSL831

Domain Name: home

Configure the second IP Address and Subnet Mask for LAN interface.= dont tick

Enable DHCP Server on the LAN =tick

Start IP Address: 192.168.1.2

End IP Address: 192.168.1.13

Leased Time:1days 0 hours0 minutes

huhuh dah siap...

sesaper yang pakai modem nih

leh ler masuk 192.168.1.1

Username : ASDL

password : expert03

Edited by Navigator®

Share this post


Link to post
Share on other sites

tanya skit ..

ni dah jadi ke blom setting yg ko nak???

dry.gif

Share this post


Link to post
Share on other sites

sudah ok yerk...

apa kata kau buat printscreen setiap page tu, maksud aku, page "Quick Start", "status" dll, pastu pos le kat sini, boleh tengok camna kau setting, kalau tak nak tunjuk usernama kau, buat le nama lain (pastu jangan le save)... okies...

Share this post


Link to post
Share on other sites

aku dah download file tu .

tapi bila nak extract, ader error yg kluar..

ke aku sorang jer yg alami perkara nih...?????? huh.gif

user posted image

Share this post


Link to post
Share on other sites

aku tak error pon..

try guna download manager..

tapi aku download ok je guna.. firefox

ok aku try donload balik..

dapat dah..

bagus gak ader benda nierr..

laugh.gif

Share this post


Link to post
Share on other sites

halo... apsal aku nyer bila guna username n password dia tak dapat pun masuk webnyer...

then bila reset kat modem pun tak de gak

then bila tuko ip modem pun pada 192.168.1.1 dia kata server tak terima.. berebut je bila nak guna internet...

apa masalah ni.. aku nak buat jadik router..

Share this post


Link to post
Share on other sites

aku pun tak paham..

modem ni kat atas dia tulis ZTE ZXDSL 831 warna biru.

aku dah try buat router...tak dapat. sebab password dia tak terima. manual pun aku dah baca.. sume password dia tak terima. aku dah reset modem pun tak boleh nak masuk jadikkan router.

ip modem aku kene set auto sebab kalo aku letak 192.168.1.1 dia tak leh connect.

confius aku...

Share this post


Link to post
Share on other sites

aku pun tak paham..

modem ni kat atas dia tulis ZTE ZXDSL 831 warna biru.

aku dah try buat router...tak dapat. sebab password dia tak terima. manual pun aku dah baca.. sume password dia tak terima. aku dah reset modem pun tak boleh nak masuk jadikkan router.

ip modem aku kene set auto sebab kalo aku letak 192.168.1.1 dia tak leh connect.

confius aku...

ok..

kau reset modem tu sekali lagi..

pastu buka kat tcp/ip tu,

ko jadikan ip tu automatic,

pastu

ko pi kat run

taipkan cmd

pastu taipkan ipconfig

ko tgk nombor gateway yg keluar tuh,

amik no gateway tuh,

try masukkan kat address bar tuh...

try guna username:admin

password: telekomst

Share this post


Link to post
Share on other sites

tah paper bewok nih

buat router

tapi tak tau sbnrnyer apa yg sdg ko buat

wakakakka

en hackezk, ader aper?? dry.gif

ku tak fhm maksud mu itu !!! ph34r.gif

Share this post


Link to post
Share on other sites

hahahah

aritu sembang ckp reti wat server la mcm2

upernyer baru reti setting modem jd router mode

hahhahaa

Share this post


Link to post
Share on other sites

assalamualaikum

skarang tgh cuba set home server pakai zte zxdsl 831 4.2a . apache dah jalan kat satu pc set static ip, port 80. pastu pakai dyndns.org untuk domain name. kat setting nat kat router ni dah set external port 80 <-> ip pc port 80.

masalah nya skarang ni, bila dari luar lan, bila cuba access ip/domain name ni (ie. test.homelinux.net) ok je sumer. tapi biler dalam lan, dier pegi kat setting router (== http://192.168.1.1). camne nak betulkan ni? susah nak test website sebab tak leh pakai domain name tu.

harap dapat beri tunjuk ajar.

Share this post


Link to post
Share on other sites

Ok.. masalah ko sama ngan den...

nak buat home server? betoi? Ok ikut langkah nie...(cara termudah)

Masuk modem configure..(192.168.1.1)

masuk advance->WAN->Internet

bila dah masuk tuh.. ko cari butang edit...

http://img86.imageshack.us/img86/2757/internet4wd.png

pastu ko kena set connection jadi manual connect...

pastu guna dailer ZTE dan connect ke tenet...

then.. ko guna la dyndns.com update client...

pastu masuk laman web ko..

Bleh x?

Share this post


Link to post
Share on other sites

emmm .. maser ko memula msuk

ko login tak.  pass ngan username kena betui la.

pastu baru leh setting

ok da settle bila aku uninstall streamyx...

da selamat pun jadik router. tq all.. laugh.gif

tongue.gif amin tahu macam-macam...umah dier ade stemik.... aku pun ada hahahahaha tongue.gif

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...