antujawi 0 Report post Posted January 5, 2010 File setupdd.sys could not be loaded.The error code is 4.Setup cannot continue. Press any key to exit.korang penah jadi mcm ni tak?dia jadi pas "boot from cd"cdrom n cd tu aku test boot kat pc lain ok je.kekadang error code 7. aku lupa plak file ape tah tak leh loaded. Quote Share this post Link to post Share on other sites
OngBok_1 2 Report post Posted January 5, 2010 Windows xp, vista or 7?kalau cd drive ok, cd installer ok, sata/IDE cable okcuba check RAM. Quote Share this post Link to post Share on other sites
Guest Report post Posted January 6, 2010 boleh nyatakan spec Quote Share this post Link to post Share on other sites
e_sentinel 0 Report post Posted January 6, 2010 Kalau pasang lebih dari satu HDD, tanggalkan dulu yang lain, pasang semula setelah selesai setup Windows. Quote Share this post Link to post Share on other sites
sleyer 2 Report post Posted January 6, 2010 dvdrom prob ni Quote Share this post Link to post Share on other sites
antujawi 0 Report post Posted January 7, 2010 ongbak : windows XP. akan di check ram tersebut. tapi kalau ram problem memang tak bleh masuk BIOS sama kan. BIOS bleh masuk.e_sentinel : HDD memang ada satu je pon.sleyer : tak guna DVDrom. guna CDrom. tapi test kat PC lain CDrom n CD tu ok je bleh setup windows.Thanks all. nanti aku try godek lagi pc membe. ram tu nak test pon susah sket coz takde pc yg guna DDR333 dlm dlm simpanan hehespec mobo asus p4sgx-mxproc soket 478. 1.6GDDR333 512HD maxtor 40Gb Quote Share this post Link to post Share on other sites
test0123 1 Report post Posted January 7, 2010 jika ram awk guna 2 slot..removed satu...dan install..error juga swap slot install..jika sama cd tu file dah corruped ataw cdrom awk tu dah kong...error reading.. Quote Share this post Link to post Share on other sites
OngBok_1 2 Report post Posted January 7, 2010 File setupdd.sys could not be loaded.Samada tak boleh read dr CD atau tak boleh write ke RAM.Tak semestinya bila boleh masuk BIOS tu RAM 100% OK.Ada address tertentu dalam RAM yang rosak.Jadi, ko kena check 1 persatu. Pastikan CD disc dan cd drive tu elok. Quote Share this post Link to post Share on other sites
B@zShâ„¢ 1 Report post Posted January 7, 2010 OngBok wrote:File setupdd.sys could not be loaded.Samada tak boleh read dr CD atau tak boleh write ke RAM.Tak semestinya bila boleh masuk BIOS tu RAM 100% OK.Ada address tertentu dalam RAM yang rosak.Jadi, ko kena check 1 persatu. Pastikan CD disc dan cd drive tu elok.Kalo kerosakan RAM yang minima (e.g., address tertentu dalam RAM yang rosak mcm bro OngBok cakap) boleh claim warranty ker?Dan camane nak proof yang RAM tu rosak Quote Share this post Link to post Share on other sites
mjmax15 0 Report post Posted January 7, 2010 try ambik cd drive yg lain, pastu try.cd mmg ok punyer kadang2 drive tu prob. Quote Share this post Link to post Share on other sites
antujawi 0 Report post Posted January 7, 2010 thanks all...cd xp sp2 n xp sp1 dua2 sama error tu jugak..nanti aku try check ram tu plak. Quote Share this post Link to post Share on other sites
OngBok_1 2 Report post Posted January 7, 2010 try tukar slot atau ram lain. Quote Share this post Link to post Share on other sites
antujawi 0 Report post Posted January 7, 2010 ok dah settle thanks all..ram tu rosak. nasib baik mobo tu ada slot utk DDR dan SDRAM.so aku try guna SDRAM. ok je bleh setup windows tu. Quote Share this post Link to post Share on other sites
mjmax15 0 Report post Posted January 11, 2010 owh..pasal ram rupanya.. ::icon_razz:: Quote Share this post Link to post Share on other sites