Gigabyte Motherboard

[deluzzion 0]

Salam,

Saya ada b'berapa soalan...

1)Nak tnya pasal Papan Induk ne GIGABYTE GA-965P-DS3.Paling tinggi RAM yg blh dipasang kat sne berapa?Maksud saya bro ialah Frekuensi 667/800/1066...rasa2 nak upgrade p yg lebih tinggi...

2)Pa Kad Grafik yg paling sesuai nak pasang kat Papan induk ne?Untuk pengetahuan,saya suka main game...

3)Ada cadangan tak mcmana nak upgrade PC saya ne?...

Sekian,Terima kasih

[mrmuvin 0]

1. Supports Dual channel DDR2 800 memory ...max 800MHz..klu gune 1066MHz dia detect smpai 800MHz je..

2. Features PCI-E graphics interface ...so..mane2 grafik kad pci-e boleh d gune kn

3. nk upgrade..?pe kate list kn dulu spec pc yg sedia ada...bru la ble di cadang kn pe yg ble n patut di upgrade...tq ::icon_biggrin::

[deluzzion 0]

Ok...tq mrmuvin...nnt sya listkan spec pc sedia ada bro bro cadangankan k...tq bro! ::icon_biggrin::

[deluzzion 0]

Bro,

Ini spec PC sya skang:

1) Processor:Core 2 Duo 1.86Ghz
2) Motherboard:GA-965P-DS3
3) Graphic Card:PCI-E ATI Radeon X550
4) RAM:1 GB (512(667Mhz)x2)

[myee 5]

aku penah pakai mobo nih....rev 3.3...support sampai E6XXX 1333fsb...klu tak silap saya proc ko cume bleh support sampai E6XXX tahap 1066fsb jerrr...pepahal ko bleh tengok mob spec ko kat sini...

CPU
Supports Intel® Core™2 Extreme Quad-Core / Core™2 Duo / Intel® Pentium® Extreme/ Intel® Pentium® D processor
Supports 1066/800/533 MHz FSB

Chipset
Northbridge: Intel® P965 Express Chipset
Southbridge: Intel® ICH8

Marvell 8053 Gigabit LAN Controller

GIGABYTE SATAII controller
Realtek ALC883 8 Channel Audio Codec

Memory
Supports DDR2 800/667/533 memory
Dual Channel architecture support up to 8GB by 4 DIMM slots
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.

Expansion Slots
1 PCI Express X16 slot
3 PCI Express X1 slot
3 PCI slots

Form Factor
ATX form factor, 305 x 210mm
Internal I/O Connectors
1 24-pin ATX power
1 4-pin ATX 12V power connector
1 floppy connector
1 IDE connector
6 SATA 3Gb/s connectors
1 CPU fan connector
1 system fan connector
1 front panel connector
1 front audio connector
1 CD In connector
3 USB 2.0/1.1 connectors for additional 6 ports by cables
1 SPDIF In connector
1 power LED connector
1 Chassis Intrusion connector

Back Panel Connectors
1 PS/2 keyboard port
1 PS/2 mouse port
1 SPDIF Out connection (coaxial+optical)
1 parallel port
4 USB 2.0/1.1 ports
1 serial port (COMA)
1 RJ-45 port
6 audio jacks (Line In / Line Out / MIC In/Surround Speaker Out (Rear Speaker Out)/Center/Subwoofer Speaker Out/Side Speaker Out)

H/W Monitoring
System voltage detection
CPU / System temperature detection
CPU / System fan speed detection
CPU warning temperature
CPU / System fan failure warning
CPU Smart Fan Control

BIOS
1 4 Mbit flash ROM
Use of licensed AWARD BIOS
Supports Virtual Dual BIOS
PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b.

Other Features
Supports RAID 0, 1, JBOD (2 ports with RAID function supported by GIGABYTE SATA2)
Supports @BIOS
Supports Download Center
Supports Q-Flash
Supports EasyTune 5
Supports Xpress Install
Supports Xpress Recovery2
Supports Virtual DualBIOS

Remark
Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
Due to most hardware/software vendors no longer offer support for Win9X/ME. If some vendors still has Win9X/ME drivers available, we will publish on website.

SOS TOMATO
http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?ProductID=2314

malangnyerr aku cume manage pakai tak sampai setahun....sebab cpu fan dah rosak..claim RMA pastuh jual balik...

[mrmuvin 0]

deluzzion wrote:Bro,

Ini spec PC sya skang:

1) Processor:Core 2 Duo 1.86Ghz
2) Motherboard:GA-965P-DS3
3) Graphic Card:PCI-E ATI Radeon X550
4) RAM:1 GB (512(667Mhz)x2)

so..skang ni nk upgrade yg mane dulu..??ram..??gc..??mobo..??atau sume skali gus..??bajet bro bape..??

[sheikomatic 0]

Upgrade mobo dulu, pastu baru upgrade proc, proc FSB 1333MHz still boleh pakai ram 667MHz.. lepas proc baru upgrade gc

[deluzzion 0]

k tq bro sheikomatic n bro myee...tq byk2... ::icon_biggrin::