Jump to content
cermin

Cpu Database.

Recommended Posts

Akum...haha at last dpt gak join clan2 AMD.....

speed original : Amd64 3000+

stepping : ADA300AEP4AX

oced speed : x full oc lagi tgh test skit2

Current Speed : 2132.7 (213.3x10)

vcore : 1.536

mobo : Abit NF8

Cooler : Cooler Master Ultra Vortex

betul ker multiplier athlon64 3000+ nih 10??

setau aku 9 jekk huh.gif

Share this post


Link to post
Share on other sites

akum..

rig lama:

speed original : Amd64 2800+

stepping : n/a

oced speed : 2115mhz (235mhzx9) @ ddr 333

vcore : 1.85v

mobo : msi k8n neo

Cooler : CM hyper 6 + 8cm cm lo speed aluminium fan 4 intake.

temp idle: 32 degrees

temp full: 37 degrees

rig baru:

speed original : Amd64 3000+ (venice)

stepping : n/a

oced speed : in progress sbb x lulus 12 hour srain test lg. (pi95)

Current Speed : 2115mhz (235mhzx9)

vcore : 1.85

mobo : Abit fatality sli nf4

Cooler : CM aquagate (r340)

temp idle: 33 degrees

temp full: 40 degrees

add info:

gcard: 2xmsi6600gt in sli mode

original core: 550mhz

oc: 580mhz

original memory:1.2ghz(ddr3)

oc:n/a

thanx..

Share this post


Link to post
Share on other sites

xkan xdak screenie kot? aku mcm xcaya jek amd64 +3000 boleh support vcore 1.85v... guna aquagate jek? setau aku lebih 1.6++ dah tahap guna high performance air gegila or guna dry ice, phase changer, peltier...

dah tu temp full 40c jek isk isk isk

Share this post


Link to post
Share on other sites

Hahah nak tipu pun agak² laa.

Klo camtue aku pun leh buat :

Proc : AXP Barton 2600+

Stepping : AQUCA GABAN

OC Speed : 300Mhz x 10 = 3.0Ghz

Vcore : 3V

Mobo : ABIT NF7 Fatality

RAM : 2 x 512MB DDR400 Hynix Fatality

Timing : 0.5-1-1-2

Vdimm : 5V

Cooler : Radiator Lori

PSU : TNB Generator

Hahahaha biggrin.gif

Share this post


Link to post
Share on other sites

Hahah nak tipu pun agak² laa.

Klo camtue aku pun leh buat :

Proc : AXP Barton 2600+

Stepping : AQUCA GABAN

OC Speed : 300Mhz x 10 = 3.0Ghz

Vcore : 3V

Mobo : ABIT NF7 Fatality

RAM : 2 x 512MB DDR400 Hynix Fatality

Timing : 0.5-1-1-2

Vdimm : 5V

Cooler : Radiator Lori

PSU : TNB Generator

Hahahaha  biggrin.gif

hahha..

Share this post


Link to post
Share on other sites

speed original: Sempron 2200+

stepping (klu leh full stepp): Aku x tau

oced speed (optional): 1.8 Ghz

vcore: 1.7v

mobo: MSI KM400

cooler yg digunakan: Stock Fan (Cooler Master)

Share this post


Link to post
Share on other sites

CPU Type: AMD Athlon XP 2000+

CPU Alias: Thoroughbred-B

CPU Stepping: B0

CPUID CPU Name: AMD Athlon XP 2000+

CPUID Revision: 00000681h

CPU Clock: 1663.76 MHz

CPU Multiplier: 12.5x

CPU FSB: 133.10 MHz

Memory Bus: 133.10 MHz

L1 Code Cache: 64 KB

L1 Data Cache: 64 KB

L2 Cache: 256 KB (On-Die, Full-Speed)

Core Voltage 1.50 - 1.65 V

I/O Voltage 1.6 V

Typical Power 44.0 - 64.0 W (depending on clock speed)

Maximum Power 48.5 - 74.3 W (depending on clock speed)

Motherboard ID: 11/22/2004-nVidia-nForce-6A61BA1BC-27

Motherboard Name: Abit NF7(-S) v2.0 (5 PCI, 1 AGP, 3 DDR DIMM, Audio, LAN)

Motherboard Chipset: nVIDIA nForce2 Ultra 400

Memory Timings: 2-2-2-6 (CL-RCD-RP-RAS)

DIMM1: Hyundai HYMD232 646D8J-D43 256 MB PC3200 DDR SDRAM

(3.0-3-3-8 @ 200MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)

Chip Ram : Hynix D-43

Award BIOS Type: Phoenix-Award BIOS v6.00PG

Sensor Type: Winbond W83627HF (ISA 290h)

Motherboard: 29 °C (84 °F)

CPU: 46 °C (115 °F)

Hardisk: 36 °C (97 °F)

Cooler System: Thermalright SLK-947u+DeltaFocus 92mm

ni image proc aku masa o/clock...eh, camner nak upload image ar.. :blink:

Edited by zero_clockz

Share this post


Link to post
Share on other sites

asal : PR 2600+

stepping : AXMG22600FQQ4C AQYHA 0431APDW

oced : 3100+ (kot)

vcore: 1.675volt (kot)

mobo: Abit NF7-S rev 2

Hsf : CMVorteX

ram : 512 samsung tccc

Bios : D26 Mantarays XT cap pak TICTAC

Idle temp : 48c

Load temp : 56c

sorry sgt...copy paste jerk nih..aku nuubie in AMD..

klu ada yg was-was tuh..sila tny dan aku check balik :P

Edited by nelza_ax

Share this post


Link to post
Share on other sites

Hahah nak tipu pun agak² laa.

Klo camtue aku pun leh buat :

Proc : AXP Barton 2600+

Stepping : AQUCA GABAN

OC Speed : 300Mhz x 10 = 3.0Ghz

Vcore : 3V

Mobo : ABIT NF7 Fatality

RAM : 2 x 512MB DDR400 Hynix Fatality

Timing : 0.5-1-1-2

Vdimm : 5V

Cooler : Radiator Lori

PSU : TNB Generator

Hahahaha :D

timing ram bes tuh :lol:

vdimm voltage pon buleh tarik sampai jadik ddr800

tuh

AMD rig aku dah ade dh

tggl gc je lagi utk mbulehkn sistem bfungsi skang nih

nnti aku antar detail

yeah

Share this post


Link to post
Share on other sites

MY AMD

proc: AMD Athlon 64 X2 3800+

speed original: 2010.4mhz

stepping : (hmm xtau)

vcore: 1.344

mobo: DFI INFINITY NF4-U

cooler yg digunakan: cooler original dr AMD

Edited by - Mr.LOneLy -

Share this post


Link to post
Share on other sites

proc: AMD Athlon 64 3200+ SC AM2

speed original: 2000MHz (2GHz)

stepping : Nak tgk kat mana

vcore: 1.390

mobo: BIOSTAR TSERIES 6100 AM2

cooler yg digunakan: Boxed Cooler

Share this post


Link to post
Share on other sites

opty

CPU : AMD 64 Opteron 144 / SC 939

original speed : 1800MHz (1.8GHz)

overclocked speed : 3000MHz (3Ghz)

stepping : CAB1E

vcore: 1.400

mobo: Asus ARP-MVP Crossfire

cooler yg digunakan: Stock Cooler

Edited by zer0Nehza

Share this post


Link to post
Share on other sites

CPU : AMD 64 Athlon 3000+ 1.8 / SC AM2

original speed : 1800MHz (2.7GHz)

overclocked speed : 2700MHz (2.7Ghz)

stepping : 2

vcore: 1.456v

mobo: Biostar Tforce 550 ver 2.0

cooler yg digunakan: ThermalTake MiniTyphoon Value dan memory heat spreader copper

suhu :

CPU : 33 c

system : 39 c

GPU : 58 c

my screenshoot :

octforce_580x435.jpg

Edited by olee76

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...