ace 0 Report post Posted April 14, 2006 Sekadar Try and error .. untuk tambah pengetahuanBoleh ka kalau nak sambungkan antara dua access point dalam satu network. Aku dok test ni tapi tak jadi lagi .... PC1 (DHCP) ---success connet (by usb wireless) ---> Aztech DSL600EW (192.168.1.1)PC2 (DHCP) ---success connet (by usb wireless) ---> D-LINK 714++ (192.198.1.2)Persolannya macam mana aku nak bagi dua dua router tu bersambung dengan mengunakan wireless?Note : jarak antara router tu cuma 20 meter kot .. kira dalam rumah aku la .. jangan ajaq sambungkan dua dua router tu guna cat5 sebab tu aku reti. Quote Share this post Link to post Share on other sites
prontoxp 2 Report post Posted April 14, 2006 Byk access point pun tak ape... step yg selalu aku guna1. Router /firewall (DHCP) ip contoh 192.168.100.12. Access point 1 - 5 static LAN contoh 192.168.100.254,192.168.100.253,293.168.100.252 dan seterusnya Kalau access point tu ada WAN / LAN Port ... connect cable tu kepada LAN port (sbb nak sama subnet).Make sure configure static IP/SSID , disable DHCP setiap Access point... Kalau access point salah satu tu as router internet...enable kan dhcp kalau perlu..yg access point selebihnya disable dhcp.. Quote Share this post Link to post Share on other sites
ace 0 Report post Posted April 14, 2006 (edited) Ok aku dah buat semula macam niPC1 (IP 192.168.1.26, Subnet 255.255.255.0 gateway 192.168.1.1) connet using LAN ---> Aztech DSL600EW (192.168.1.1) (DHCP enable)PC2 (IP 192.168.1.53, Subnet 255.255.255.0 gateway 192.168.1.1) connet using LAN ---> D-LINK 714++ (192.198.1.2) (DHCP disable)Tapi still tak buleh .. tang mana lagi tak betoi aaa ... Edited April 14, 2006 by ace Quote Share this post Link to post Share on other sites
Sabar 0 Report post Posted April 14, 2006 Pastikan kedua-dua AP tu disetting dengan channel yang sama ... kalau channel 6 kedua-dua channel 6 barulah AP tu boleh berkomunikasi satu samal lain....lagi satu kalau station sama -sama station. kalau ad hoc sama-sama ad hoc la...harap membantu Quote Share this post Link to post Share on other sites
prontoxp 2 Report post Posted April 14, 2006 Pastikan kedua-dua AP tu disetting dengan channel yang sama ... kalau channel 6 kedua-dua channel 6 barulah AP tu boleh berkomunikasi satu samal lain....lagi satu kalau station sama -sama station. kalau ad hoc sama-sama ad hoc la...harap membantuPC1 (IP 192.168.1.26, Subnet 255.255.255.0 gateway 192.168.1.1) connet using LAN ---> Aztech DSL600EW (192.168.1.1) (DHCP enable)PC2 (IP 192.168.1.53, Subnet 255.255.255.0 gateway 192.168.1.1) connet using LAN ---> D-LINK 714++ (192.198.1.2) (DHCP disable)**** SKRG ni aztech DSL600EW tu gateway kepada semua network client IP= 192.168.1.1 , configure manual DLINK 714 ++ static ip LAN = 192.168.1.2/255.255.255.0. DHCP Off, Wan Connection tak perlu Set. Quote Share this post Link to post Share on other sites
kotatinggi 0 Report post Posted April 14, 2006 tak boleh uat cam tue...kecuali ada function repeater..di-714 tue takde function repeater..kalo AP boleh uat function camtue Quote Share this post Link to post Share on other sites
ace 0 Report post Posted April 14, 2006 Tu la aku dok buat tak jejadi lagi ni ... eeemm ada jalan lain lagi dak ... Quote Share this post Link to post Share on other sites
kotatinggi 0 Report post Posted April 15, 2006 pada aku...ko guna AP yg ada function Wireless client..yg tue leg detect ke wireless router ko.. Quote Share this post Link to post Share on other sites
prontoxp 2 Report post Posted April 15, 2006 (edited) may be aku tak paham situasi... anyway kena ada AP yg boleh connect as bridge mode... Dulu aku penah tgk satu AP yg ada transmit dgn reciever .. bermakna dia tu local AP kepada client dan boleh connect ke AP yg lain ... kena guna sama model sbbnya AP ni connect antara AP guna pcmcia card juga..Utk model skrg ni aku tak pasti pulak... tapi mode bridge AP mmg dah ada... contohnya 3com atau DLINK .. Edited April 15, 2006 by prontoxp Quote Share this post Link to post Share on other sites
ace 0 Report post Posted April 15, 2006 selepas buat macam macam langkah pun tak jadi diharapkan kalau puteranian ada apa apa info sila kemukakan kat sini untuk rujukan bersama Quote Share this post Link to post Share on other sites
natrium 0 Report post Posted August 1, 2006 Ok aku dah buat semula macam niPC1 (IP 192.168.1.26, Subnet 255.255.255.0 gateway 192.168.1.1) connet using LAN ---> Aztech DSL600EW (192.168.1.1) (DHCP enable)PC2 (IP 192.168.1.53, Subnet 255.255.255.0 gateway 192.168.1.1) connet using LAN ---> D-LINK 714++ (192.198.1.2) (DHCP disable)Tapi still tak buleh .. tang mana lagi tak betoi aaa ...misal kata la satu drp port RJ45 pd Aztech DSL600EW dgn satu drp port RJ45 pd D-Link 714 disambungkan guna cross/straight cable, mesti settle problem ni.kalau tak betul, tolong betul kan la ye.. Quote Share this post Link to post Share on other sites
scorps 1 Report post Posted March 29, 2007 Sekadar Try and error .. untuk tambah pengetahuanBoleh ka kalau nak sambungkan antara dua access point dalam satu network. Aku dok test ni tapi tak jadi lagi .... PC1 (DHCP) ---success connet (by usb wireless) ---> Aztech DSL600EW (192.168.1.1)PC2 (DHCP) ---success connet (by usb wireless) ---> D-LINK 714++ (192.198.1.2)Persolannya macam mana aku nak bagi dua dua router tu bersambung dengan mengunakan wireless?Note : jarak antara router tu cuma 20 meter kot .. kira dalam rumah aku la .. jangan ajaq sambungkan dua dua router tu guna cat5 sebab tu aku reti. Topik perbincangan ini dipindah dr bahagian Rangkaian ke bahagian Wirelessharap maklum Quote Share this post Link to post Share on other sites
