Hackezkk 4 Report post Posted October 3, 2004 Sape tau camner nak buat nihmobo aku tak sapot la boot from CDHmmmm Quote Share this post Link to post Share on other sites
Hackezkk 4 Report post Posted October 3, 2004 Satu lagikkalo kiter buat boot disket guner Free BSD version yg lamer bleh tak ?? Quote Share this post Link to post Share on other sites
Hackezkk 4 Report post Posted October 3, 2004 Aku jumper satu file tuh kat tnentdier suh buat camnie FreeBSD Installation with IOI controllersWhile these procedures are easy, you should throughly read and understandall the steps before you begin.1.If you hvae to creat boot floppy from MS-DOS, you enter: C:\>rawrite kern.flp a: <---boot diskette C:\>rawrite msfroot.flp a: C:\>rawrite repair.flp a: <---repair diskette2.Insert the boot diskette and reboot your computer, you will begin the installation. In case something goes wrong, look unformation in: http://www.freebsd.org/handbook http://www.freebsd.org/FAQ/FAQ.html3.Finish the installation. don't exit the main menu. Enter the main menu, and than select the "Fixit". You will enter repair mode with CDROM. you enter the following command: #mount (To sure your hard driver is mounted.) Insert the repair floppy diskette.(repair.flp) #tar xf /dev/fd0 kernel4.finally, you exit the main menu by selecting Quit, remember to remove the repair diskette. After that, the system will reboot. aku tulih rawrite takleh pon ???? Quote Share this post Link to post Share on other sites
Hackezkk 4 Report post Posted October 4, 2004 Takkan sorang tak tau kottHelp meeetrusunuci Quote Share this post Link to post Share on other sites
mchammer 0 Report post Posted October 4, 2004 Assalamualaikumhttp://www.freebsd.org/doc/en_US.ISO8859-1...nstall-pre.htmlBaca bahagian 2.2.7 Prepare the Boot Media Quote Share this post Link to post Share on other sites
NSX 0 Report post Posted October 8, 2004 Hackezkk, ape lagi masalahnya? step yang kau jumpa tu tak boleh pakai ke? boleh boot pakai floppy tak? Quote Share this post Link to post Share on other sites
badai_707 0 Report post Posted October 8, 2004 (edited) http://www.freebsd.org/~picobsd/bootldr.binCopy it to a floppy (using dd(1)) and you have a boot floppy that youcan mount (it has a ufs filesystem) and customize.i've not try yet.. if still can't http://lists.freebsd.org/pipermail/freebsd...ber/023572.htmlelse beli CDROM baru arend if Edited October 8, 2004 by badai_707 Quote Share this post Link to post Share on other sites
oshiri 0 Report post Posted October 8, 2004 Ada cdrom tapi mobo tak support boot dari cd.Donload ini smart boot manager dan buat boot floppy, kemudian boot guna itu floppy dan select boot dari cd.sbm Quote Share this post Link to post Share on other sites
Hackezkk 4 Report post Posted October 8, 2004 Owhhtank Qaku tak try lagikAku raser Floppy aku rusaklacilake tulBrape floppy paling cikai huh ? Quote Share this post Link to post Share on other sites
alternat0r 0 Report post Posted October 8, 2004 Brape floppy paling cikai huh ?Dalam lingkungan RM25-RM50 camtu .... atau kurang lagi ... Quote Share this post Link to post Share on other sites
zam4ever 0 Report post Posted October 21, 2004 Berbalik kepada persoalan asas, BIOS tidak menyokong system utk boot daripada CD-ROM. Untuk FreeBSD, ada 2 cara yg mudah iaitu:1. Boot daripada floppy, installation via CD-ROM.2. Boot daripada floppy, installation via network.Utk maklumat lanjut, sila lawati dan fahami penerangan terperinci di sini:ftp://ftp.freebsd.org/pub/FreeBSD/release...pies/README.TXTMemandangkan anda masih baru dalam bidang FreeBSD, adalah digalakkan agar anda menggunakan 4.x branch, dan elakkan 5.x branch. Pada ketika ini, 4.x branch dikategorikan sebagai "Production Release" manakala 5.x branch sebagai "New Technology Release".Selamat mencuba.Salam ceria. Quote Share this post Link to post Share on other sites
Hackezkk 4 Report post Posted October 25, 2004 lorrraku ader version 5.0 laaacamne nih Quote Share this post Link to post Share on other sites
oshiri 0 Report post Posted October 25, 2004 (edited) HackezkkKo dah update ke bios ko? Suspen?Aku jawab kat sini aje ko punye PM dan post yg satu lagi.Kita boot ko punya cdrom guna grub dan smart boot manager. Sebab ko takut mbr ko kena kacau, kita guna grub untuk dos dan install ke partition pertama harddisk pertama ko. Mula-mula aku nak guna smart boot manager aje, tapi tak boleh install ke ntfs atau fat32. Jadi aku ubah sikit procedurnye.Resepinya:Bahan-bahan utk di download:1) http://s94592085.onlinehome.us/grub/grub9.zip2) http://www.lrz-muenchen.de/~bernhard/memdisk.bin3) http://www.lrz-muenchen.de/~bernhard/sbootmgr.dskCara-caranya:1) Ko extract grub9.zip kat temporary folder ko.2) Ko buat folder baru dalam C; C:\boot\grub3) Ko copy file memdisk.bin dan sbootmgr.dsk ke folder C:\boot\grub4) Ko pergi ke temporary folder yg ko extract grub9.zip tadi; ko masuk dalam folder GRUB.BIN dan ko copy semua file dalam tu ke C:\boot\grub.5) Dalam folder temporary yg sama; ko masuk folder Root_Of_NTFS, ko copy filegrldr ke C:\6) Lepas tu ko pergi ke folder C:\boot\grub dan ko buat satu file baru guna wordpad dan ko namakan file tu menu.lst. Ko copy dan paste aje ape yg aku buat kat bawah ni:###################################################### # GvR Sept 30th 2004 color black/cyan yellow/cyan timeout=5 default=0 title Default Boot on HD 0 rootnoverify (hd0,0) chainloader +1 boot title Boot CD Rom kernel (hd0,0)/boot/grub/memdisk.bin initrd (hd0,0)/boot/grub/sbootmgr.dsk boot 7) Lepas tu ko pergi ke C:\ dan ko edit boot.ini; ko tambah: c:\boot\grub\grldr="Start Grub" kat bahagian paling bawah. EX: [boot loader] timeout = 30 default = multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS = "Microsoft Windows XP Professional" /fastdetect c:\boot\grub\grldr="Start Grub"8) Dah siap. Boleh la ko reboot dan try.Aku tak jamin benda ni berjaya utk sistem ko, tapi aku dah cuba dalam sistem aku.Utk pengetahuan aje : kalau ko nak try freebsd, ko boleh try FreeSBie livecd. Kalau ko rase selesa baru la ko install.http://www.freesbie.org/Good luck Edited October 25, 2004 by oshiri Quote Share this post Link to post Share on other sites
TRUNASUCI 15 Report post Posted October 25, 2004 huh trunusuci?Mobo tak sport CDROM? zaman biler punye tuh? sebelum 486 ka? aku ada bootloader dalam bentuk floppy nama SBM.. maybe ko leh try download mana2 kut? Quote Share this post Link to post Share on other sites
Hackezkk 4 Report post Posted October 25, 2004 MOBO aku cap aopen ax6bc -ezakupon tak tau naper tak sapot cdromdan smalam aku dah flashkan MOBO akumuahhahahahahhahahaproblem solvedhttp://download.aopen.com.tw/default.aspxskarang aku nak blaja buat 2 booting laksatu winxp satu lagikk freebsdsaper leh ajo camnerGRUB atau LILO lagi senang nak config Quote Share this post Link to post Share on other sites
oshiri 0 Report post Posted October 26, 2004 Ko boleh guna grub macam aku tunjuk kat atas dan tambah line ni kat menu.lst:title FreeBSD 5rootnoverify (hd0,1) ***bergantung pada hardisk dan partition yg ko install freebsdmakeactivechainloader +1atautitle FreeBSD 5root (hd0,1,a) ***bergantung pada hardisk/partition yg ko install freebsd dan jenis partitionkernel /boot/loaderRujuk ini utk jenis partition:Partition num: 2, [bSD sub-partitions immediately follow ]BSD Partition num: 'a',Filesystem type is ffs, partition type 0xa5BSD Partition num: 'b', Filesystem type is unknown, partition type 0xa5BSD Partition num: 'c', Filesystem type is ffs, partition type 0xa5atau ko boleh install Grub dari BSD. Quote Share this post Link to post Share on other sites