Jump to content
sepet

Cannot Accessible

Recommended Posts

klu nak attach gambar

aku buat cam ni jee

pi tekan printscreen pastu pastekan dlm paint....pastu...pi hostkan pic yg telah ditangkap ke mana² site free hosting utk upload gambar nie... contohnye photobucket.com

tu kalau gambar dr dlm komp kau

tapi klu gambar dari internet kau tekan je kat menu IMG

masukkan link gambar tuu

ada kan kat ats tuuu

okk

skrg niie

boleh bagitau apa yg kau nakk buat sebenarnyaa.....

kau nak setup internet connection dgn networking sekali???

maaf klu menyusahkan!!!

Edited by scorps

Share this post


Link to post
Share on other sites

klu nak attach gambar

aku buat cam ni jee

pi tekan printscreen pastu pastekan dlm paint....pastu...pi hostkan pic yg telah ditangkap ke mana² site free hosting utk upload gambar nie... contohnye photobucket.com

tu kalau gambar dr dlm komp kau

tapi klu gambar dari internet kau tekan je kat menu IMG

masukkan link gambar tuu

ada kan kat ats tuuu

okk

skrg niie

boleh bagitau apa yg kau nakk buat sebenarnyaa.....

kau nak setup internet connection dgn networking sekali???

maaf klu menyusahkan!!!

aku nak setup network je internet dah ok...

aku dah buat network wizard tapi still x boleh jgk..

bila aku nak access pc yg stau lagi die kuar msg error...

mcm ni...

[imghttp://i2.photobucket.com/albums/y3/sepet/network.bmp

Share this post


Link to post
Share on other sites

klu nak attach gambar

aku buat cam ni jee

pi tekan printscreen pastu pastekan dlm paint....pastu...pi hostkan pic yg telah ditangkap ke mana² site free hosting utk upload gambar nie... contohnye photobucket.com

tu kalau gambar dr dlm komp kau

tapi klu gambar dari internet kau tekan je kat menu IMG

masukkan link gambar tuu

ada kan kat ats tuuu

okk

skrg niie

boleh bagitau apa yg kau nakk buat sebenarnyaa.....

kau nak setup internet connection dgn networking sekali???

maaf klu menyusahkan!!!

Share this post


Link to post
Share on other sites

quote=scorps,Mar 3 2005, 01:12 PM]

klu nak attach gambar

aku buat cam ni jee

pi tekan printscreen pastu pastekan dlm paint....pastu...pi hostkan pic yg telah ditangkap ke mana² site free hosting utk upload gambar nie... contohnye photobucket.com

tu kalau gambar dr dlm komp kau

tapi klu gambar dari internet kau tekan je kat menu IMG

masukkan link gambar tuu

ada kan kat ats tuuu

okk

skrg niie

boleh bagitau apa yg kau nakk buat sebenarnyaa.....

kau nak setup internet connection dgn networking sekali???

maaf klu menyusahkan!!!

Share this post


Link to post
Share on other sites

mana gambarnya??

takde punn!!!!

unsure.gif

Share this post


Link to post
Share on other sites

"so modem yg ada function router tak boleh guna utk network lah...

jadi apa fungsi eth/act pd modem tu...

router dgn switch ni sama fungsi ke?

aku guna usb utk connect internet...

dan pc yg satu lagi connect internet guna cable yg disambungkan pd eth/act tu...

aku guna modem adsl aztech 305e..."

ini maklumat dari Aztech website:

3.0 PHYSICAL SPECIFICATIONS

LED Indicators :

- 1 x Power LED

- 1 x Ethernet Link Status/Activity LED

- 1 x DSL Link Status LED

External Connectors :

- 1 x RJ-11 Telephone socket for ADSL line

- 1 x RJ45 for 10/100Base-T Ethernet (MDI-X)

- 1 x DC Power Connector

- 1 x On/Off Power Switch (Population Option)

- 1 x Factory Default Reset Button

Dari maklumat diatas takdepun sebut yg Aztech ni ada USB connector...?

Dan yang ajaibnya macamana kau boleh dapat internet melalui USB connector...apakah benda yg disambung dihujung USB kau tu?

Mari kita huraikan port by port:

- 1 x RJ-11 Telephone socket for ADSL line [yg ni sambung ke line telepon]

- 1 x RJ45 for 10/100Base-T Ethernet (MDI-X) [yg ni sambung ke Network card PC kau atau hub atau switch]

- 1 x DC Power Connector [yg ni sambung ke power adapter]

- 1 x On/Off Power Switch (Population Option) [yg ni switch utk power, berbeza dari switch network, rupanya pun tak sama...]

- 1 x Factory Default Reset Button [yg ni tekan kalau nak reset balik seperti mana ianya keluar dari Kilang]

Dan takdepun port USB..??? Cuba jawab soalan yg ditanya...satu persatu, besar kemungkinan, pasti kita akan dapat jawapannya dipenghujung! jangan tambah pula dgn soalan2 lain. nanti forum jadi panjang...dan merapu ke kes lain!

TU aje!

Edited by MidNiteOil

Share this post


Link to post
Share on other sites

"so modem yg ada function router tak boleh guna utk network lah...

jadi apa fungsi eth/act pd modem tu...

router dgn switch ni sama fungsi ke?

aku guna usb utk connect internet...

dan pc yg satu lagi connect internet guna cable yg disambungkan pd eth/act tu...

aku guna modem adsl aztech 305e..."

ini maklumat dari Aztech website:

3.0 PHYSICAL SPECIFICATIONS

LED Indicators :

- 1 x Power LED

- 1 x Ethernet Link Status/Activity LED

- 1 x DSL Link Status LED

External Connectors :

- 1 x RJ-11 Telephone socket for ADSL line

- 1 x RJ45 for 10/100Base-T Ethernet (MDI-X)

- 1 x DC Power Connector

- 1 x On/Off Power Switch (Population Option)

- 1 x Factory Default Reset Button

Dari maklumat diatas takdepun sebut yg Aztech ni ada USB connector...?

Dan yang ajaibnya macamana kau boleh dapat internet melalui USB connector...apakah benda yg disambung dihujung USB kau tu?

Mari kita huraikan port by port:

- 1 x RJ-11 Telephone socket for ADSL line [yg ni sambung ke line telepon]

- 1 x RJ45 for 10/100Base-T Ethernet (MDI-X) [yg ni sambung ke Network card  PC kau atau hub atau switch]

- 1 x DC Power Connector [yg ni sambung ke power adapter]

- 1 x On/Off Power Switch (Population Option) [yg ni switch utk power, berbeza dari switch network, rupanya pun tak sama...]

- 1 x Factory Default Reset Button [yg ni tekan kalau nak reset balik seperti mana ianya keluar dari Kilang]

Dan takdepun port USB..??? Cuba jawab soalan yg ditanya...satu persatu, besar kemungkinan, pasti kita akan dapat jawapannya dipenghujung! jangan tambah pula dgn soalan2 lain. nanti forum jadi panjang...dan merapu ke kes lain!

TU aje!

setuju... smile.gif

betul tu...

ada yang ada usb port tapi xde port rj45.

kalau ada port rj45 maka xde usb port.

tq....

Share this post


Link to post
Share on other sites

ok ..

cuba kau tgk gambar tuu..

user posted image

kan ade tu usb port tuuu...

ok

klu laa modem kau sama mcm niii

maka,

1 pc kau sambung guna usb port tuu

1 pc lagi guna cable utp tuuu...

okk

klu guna modem aztech ,

nak setting dia

kau taip 192.168.1.1 kat address i.e tuu

pastu login dia >>admin

password>>password

yg ETH/ACT tuu port utk cable utp tuu....

cool.gif

Share this post


Link to post
Share on other sites

tambahan...

user posted image

user posted image

user posted image

user posted image

sini lagi detailss

harap membantuu

okk

cool.gif

Share this post


Link to post
Share on other sites

tambahan...

user posted image

harap membantuu

okk

cool.gif

ok scorps dari gambar yg kat atas, mcm mana aku nak buat network dgn pc yg satu lagi tu...

aku dah buat network wizard tapi x boleh nak connect pc yg satu lagi tu..

Share this post


Link to post
Share on other sites

ok scorps dari gambar yg kat atas, mcm mana aku nak buat network dgn pc yg satu lagi tu...

aku dah buat network wizard tapi x boleh nak connect pc yg satu lagi tu..

tengok le cable apa yang dia pakai tu...

utp cable kedua-duanya....

cara kau connect tu salah.

patut not accessible...

tq.... smile.gifsmile.gif

Share this post


Link to post
Share on other sites

tengok le cable apa yang dia pakai tu...

utp cable kedua-duanya....

cara kau connect tu salah.

patut not accessible...

tq.... smile.gifsmile.gif

ok...

tapi aku tak guna RJ45 aku connect guna usb...

cuma pc yg satu lagi tu connect guna RJ45...

pc yg aku nak network tu kena setting apa2 tak?

Share this post


Link to post
Share on other sites

ok...

tapi aku tak guna RJ45 aku connect guna usb...

cuma pc yg satu lagi tu connect guna RJ45...

pc yg aku nak network tu kena setting apa2 tak?

cuba nko setting gateway sama seperti gateway router tu..

workgroup mesti sama antara pc

cula dulu...

Share this post


Link to post
Share on other sites

klu tak silap aku

ip address utk modem tu ialah 192.168.1.1

so pc kau tu letak laa 192.168.1.3

dan satu lagi tuu 192.168.1.4 kee

gateway dia mesti 192.168.1.1

sama dgn gateway router modem tuuu

okkk

mesti sama workgroup yeee

pastu buat laa setup a home or small office network tuu

sbnrnya mudah saja

heheheheee........

cool.gif

Share this post


Link to post
Share on other sites

ok ..

cuba kau tgk gambar tuu..

user posted image

kan ade tu usb port tuuu...

ok

klu laa modem kau sama mcm niii

maka,

1 pc kau sambung guna usb port tuu

1 pc lagi guna cable utp tuuu...

okk

klu guna modem aztech ,

nak setting dia

kau taip 192.168.1.1 kat address i.e tuu

pastu login dia >>admin

password>>password

yg ETH/ACT tuu port utk cable utp tuu....

cool.gif

Alamak! Tak dapat network lagi ke sepet....

Okay mari kita hurai satu persatu....kalau kita guna router dan juga 2 PC...kita mesti kena ada 4 IP.

Streamyx IP - ialah IP yg diberi oleh Streamyx, benda ni bertukar tukar setiap kali kita buat sambungan ke streamyx. So, kau jangan risau pasal ni, router kau yg control benda ni

Router IP - untuk control dua PC router mesti kena ada "local IP". Seperti scorp kata kat atas, besar kemungkinan router kau pakai "192.168.1.1" benda ni boleh tukar, tapi factory default mungkin "192.168.1.1". Tapi Aztech yg pernah aku pakai, default IP nya ialah "10.0.0.1". so kau kena tahu benda ni..biasa kat bawah router ada tulis factory default IP

IP untuk PC No 1- sekiranya router IP kau "192.168.1.1". PC no1 kau kena la 192.168.1.2

IP untuk PC No 2 - sebaiknya 192.168.1.3

Kalau kau nye router 10.0.0.1, PC1 - 10.0.0.2 dan PC2 - 10.0.0.3

Tapi yang aku mushkil ni tentang program router tu sendiri, kau takde sebutpun kau dapat access ke tidak masuk dalam router ni! Dia biasanya ada DHCP server yg mana dia akan automatic kasi IP pada PC, PC lain yg ada dalam network!Kau kena set Router ni...betul betul! Nescaya akan berjaya

Ingat...mesti ada 4 IP ni... kalau 1 takde IP, atau samar samar, maka panjang la lagi forum ni! he he

Share this post


Link to post
Share on other sites

klu tak silap aku

ip address utk modem tu ialah 192.168.1.1

so pc kau tu letak laa 192.168.1.3

dan satu lagi tuu 192.168.1.4 kee

gateway dia mesti 192.168.1.1

sama dgn gateway router modem tuuu

okkk

mesti sama workgroup yeee

pastu buat laa setup a home or small office network tuu

sbnrnya mudah saja 

heheheheee........

cool.gif

sama workgroup tu mcm mana scorps...

ko boleh ajar step by step aku x tau langsunglah psl network ni...

sori lah kalau nyusahkan ko...

Share this post


Link to post
Share on other sites

-= First I will explain how to share internet between 2 computers at home WITHOUT using a switch=-

This is the cheaper method. Stuff you need :

1. Two computers

2. Three Lan cards

3. PC to Cable Modem (a.k.a Straight) Ethernet wire

4. PC to PC (a.k.a Crossover) Ethernet wire

5. Windows XP installed on both systems

Steps :

First put TWO Lan cards in the Computer 1 and install the necessary drivers, make sure the lan cards are working properly.

Connect Computer 1 to the WC Cable modem using the PC to Cable modem (straight) ethernet wire.

Put the third Lan card in Computer 2 and install the necessary drivers.

Connect the second lan card on Computer 1 to Computer 2 using a PC to PC (crossover) ethernet wire.

If you did everything right, this is the configuration you would have :

user posted image

Share this post


Link to post
Share on other sites

Start both computers up and then follow the procedure below :

ON COMPUTER 1 :

Go to Start > Control Panel > Network Connections > Then click on SETUP A HOME OR SMALL OFFICE NETWORK

user posted image

A window will pop-up as shown below

user posted image

Click Next

user posted image

Share this post


Link to post
Share on other sites

user posted image

Click on NO, LET ME CHOOSE ANOTHER WAY TO CONNECT TO INTERNET.

Click Next

user posted image

Click on the first option. Click Next

user posted image

user posted image

In the computer name put the name you want for the main computer e.g. Computer 1. Then click Next

Share this post


Link to post
Share on other sites

user posted image

In the WorkGroup Name you can put any name but MAKE SURE THE WORKGROUP NAME IS SAME ON BOTH COMPUTERS. I usually leave it MSHOME. Click Next

user posted image

user posted image

On this screen make sure u click on JUST FINISH THE WIZARD, I DONT NEED TO RUN WIZARD ON OTHER COMPUTERS.

Then click next

On the last screen Click Finish.

THIS SETS UP EVERYTHING ON COMPUTER ONE !

===============================================

ON COMPUTER 2 :

Go to Start > Control Panel > Network Connections > Then click on SETUP A HOME OR SMALL OFFICE NETWORK

All the steps are exactly the same as on Computer 1 except on this window :

user posted image

MAKE SURE you choose the second option :

THIS COMPUTER CONNECTS TO THE INTERNET THROUGH ANOTHER COMPUTER OR THROUGH A RESIDENTIAL GATEWAY.

Finish the wizard on the second computer and restart both computers. Make sure WorkGroup Name is same on both Computers. Thats it ! Everything should work fine....

MAIN DISADVANTAGE of this method :

Computer 1 has to be ON in order for Computer 2 to go online !

smile.gifsmile.gifsmile.gif

Share this post


Link to post
Share on other sites

ok scorps time kasih aku akan try buat ikut ajaran ko ni...

tp kalau pc yg satu lagi guna win ME setting die pun sama ke...

atau ada setting lain...

utk makluman ko aku guna win XP & pc yg satu lagi guna winME....

Share this post


Link to post
Share on other sites

klu windows yg lain lain ni problem sikit

ok

klu kat win xp kau guna cara tadi

kat wi me plak

caranya....

Windows ME

1. Click Start->Settings->Control Panel

user posted image

2. Click Add/Remove Programs

user posted image

3. Select the Windows Setup tab and click on Communications

user posted image

Share this post


Link to post
Share on other sites

4. Click the Details button and select Dial-up Networking. Scroll down and also select Virtual Private Networking.

user posted image

user posted image

5. Click OK, and click OK. Restart your computer.

6. Right click My Network Places and select properties.

user posted image

7. Verify your network configuration to have a Client for Microsoft Networks, a Dial-Up Adapter, A Microsoft Virtual Private Network Adapter, and the TCP/IP protocol loaded.'

user posted image

try tgk kat sini ....

okkk

smile.gifsmile.gifsmile.gif

Share this post


Link to post
Share on other sites

4. Click the Details button and select Dial-up Networking. Scroll down and also select Virtual Private Networking.

user posted image

user posted image

5. Click OK, and click OK. Restart your computer.

6. Right click My Network Places and select properties.

user posted image

7. Verify your network configuration to have a Client for Microsoft Networks, a Dial-Up Adapter, A Microsoft Virtual Private Network Adapter, and the TCP/IP protocol loaded.'

user posted image

try tgk kat sini ....

okkk

smile.gif  smile.gif  smile.gif

aku dah ikut yg ko ckp tu scorp tapi x boleh jgk..

kuar msg camni..

user posted image

Share this post


Link to post
Share on other sites

network tu sharing ke tak??

user posted image

klu tak buat

kena sharing dulu laaa

baru boleh access pc tuu

user posted image

try tgk kat sini yee...

okk

harap membantu

rolleyes.gif

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...