Tolong Windows System 32 Encountered Problems

[ibrahim 0]

apa masalah nih sebenarnya.. bila aku tekan dont send.

tenet akan disconnect dengan sendirinya. tak bleh connect balik to the net.

kena restart pc.. baru bleh connect balik..

it happen 30minit after aku online.

[kerim 0]

apa masalah nih sebenarnya.. bila aku tekan dont send.

tenet akan disconnect dengan sendirinya. tak bleh connect balik to the net.

kena restart pc.. baru bleh connect balik..

it happen 30minit after aku online.

Bang brahim, cuba tengok event viewer...pastu tengok tanda merah. dapatkan nombor event id...paste kat sini

[acer_aspire 0]

aku pun ade kene cmni...tapi xde r sampai disconnect sndiri...

[ashton 0]

alo kawan...cuba ko try download software combofix scan n restart blk pc...mesti ok punye

[pali bote 0]

aku pun kene generic w32 ni..mcm mane nak wat?? internet sndr disconnect..pastu theme aku sndr akan bertukar jd lain..klu ada software kasi la kat aku ek...dah xlalu aku nak 4mat dah..ni punca ape?virus??malware?? tell me..

[pali bote 0]

aku pun same kene mcm nie..theme xp dia sendri tukar..pastu internet terus disconnect..ada xsoftware utk buat generic host 2???

[pali bote 0]

apa masalah nih sebenarnya.. bila aku tekan dont send.

tenet akan disconnect dengan sendirinya. tak bleh connect balik to the net.

kena restart pc.. baru bleh connect balik..

it happen 30minit after aku online.

aku pun pernah kene benda nie..bile tgh online dia kuar notis. bile tekan don't send internet terus disconnect pastu theme akan tukar sndr..sape ada cara2 nak hilang generic host 2??kongsi la..jgn le kedekut..huhu

[sHäm 4]

korang guna Win XP Pro SP2 dan IE 6 ?....

[DigIT 0]

alo kawan...cuba ko try download software combofix scan n restart blk pc...mesti ok punye

tau x ape tu kegunaan combo fix?jangan main2 kalu xpandai guna....

to TS,dah update windows?

[kerim 0]

try disable windows update

[pali bote 0]

try disable windows update

aku gune winxp pack 2..IE 7..windows update aku dah disable...masa format dulu2 aku dah disable..xpenah enable kan..mcm mane nak ok???ada software x???

[sHäm 4]

update ke SP3..dah lama sgt dah tu SP2 dah obsolete (lbh kurang expired la)..

[kerim 0]

aku gune winxp pack 2..IE 7..windows update aku dah disable...masa format dulu2 aku dah disable..xpenah enable kan..mcm mane nak ok???ada software x???

tekan click here kat kotak message tu, copy & paste apa yg ada kat sini.

[ashton 0]

tau x ape tu kegunaan combo fix?jangan main2 kalu xpandai guna....

to TS,dah update windows?

alo bro den takkan bg solution nih klu den tak ponah guna...takdo pekdahnye nak suko-suko....baek den g maen kat funfair...he,..he..hee..untuk pengetahuan ekau kegunaan combofix nih peralatan khas yang digunakan untuk remove malware virus yg singgah kat dlm pc kito...n membantu remove malware yg di scan kat hijackthis bg yg was-was untuk fix checked...tp mmg klu pasai system 32 combofix nih mmg bleh pki.....

p/s:-den hanya bg pendapat bg yang memerlukan jawapan*

[ashton 0]

tau x ape tu kegunaan combo fix?jangan main2 kalu xpandai guna....

to TS,dah update windows?

klu nak pki software nih first skali ekau kono install windows recovery console kat hard drive untuk backup system@klu taknak just boot guna cd windows>lepas kuar windows setup>press R...arahan bwh nih tuk install kat hard drive#

ikut step nih

mskkn cd windows>run>type X:\i386\winnt32.exe /cmdcons(x:adalah cd-drive>)>press ok

after press ok sistem akan prompt windows setup klik "yes">press ok & kuarkn cd windows ekau

pasni bilo ekau start windows akan ae 2 arahan select operating sistem satu windows satu ag windows recovery console>tekan enter>akan arahan C:\Windows> & pastu bleh ikut command yg den bg nih

kat bwh ni serba sedikit arahan mggunakan recovery console

Attrib - Changes attributes on a file or directory.

Batch - Executes commands that you specify in the text file, Inputfile. Outputfile holds the output of the commands. If you omit the Outputfile parameter, output appears on the screen.

Bootcfg - Allows you to modify the Boot.ini file for boot configuration and recovery.

CD - (Chdir) Change directory. Operates only in the system directories of the current Windows installation,

removable media, the root directory of any hard disk partition, or the local installation sources.

Chkdsk - Checks a disk for drive problems or errors. The /p switch runs Chkdsk even if the drive is not flagged

as dirty. The /r switch locates bad sectors and recovers readable information.

This switch implies /p. Chkdsk requires Autochk.

Chkdsk automatically looks for Autochk.exe in the startup folder.

If Chkdsk cannot find the file in the startup folder, it looks for the Windows 2000 Setup CD-ROM.

If Chkdsk cannot find the installation CD-ROM, Chkdsk prompts the user for the location of Autochk.exe.

Cls - Clears the screen

Copy - Copies one file to a target location. By default,

the target cannot be removable media, and you cannot use wildcard characters.

Copying a compressed file from the Windows 2000 Setup CD-ROM automatically decompresses the file.

Del - (Delete) Deletes one file. Operates within the system directories of the current Windows installation,

removable media, the root directory of any hard disk partition, or the local installation sources.

By default, you cannot use wildcard characters.

Dir - Displays a list of all files, including hidden and system files.

Disable - Disables a Windows system service or driver. The variable service_or_driver is the name of the service

or driver that you want to disable. When you use this command to disable a service,

the command displays the service's original startup type before it changes the type to SERVICE_DISABLED.

Note the original startup type so that you can use the enable command to restart the service.

Diskpart - Manages partitions on hard disk volumes. The /add option creates a new partition.

The /delete option deletes an existing partition. The variable device is the device name for a new partition (such as \device\harddisk0). The variable drive is the drive letter for a partition that you are deleting (for example, D). Partition is the partition-based name for a partition that you are deleting, (for example: \device\harddisk0\partition1) and can be used instead of the drive variable. The variable size is the size, in megabytes, of a new partition.

Enable Enables a Windows system service or driver. The variable service_or_driver is the name of the service or driver that you want to enable, and start_type is the startup type for an enabled service. The startup type uses one of the following formats:

SERVICE_BOOT_START

SERVICE_SYSTEM_START

SERVICE_AUTO_START

SERVICE_DEMAND_START

Exit - Quits the Recovery Console, and then restarts the computer.

Expand - Expands a compressed file. The variable source is the file that you want to expand.

By default, you cannot use wildcard characters.

The variable destination is the directory for the new file. By default,

the destination cannot be removable media and cannot be read-only.

You can use the attrib command to remove the read-only attribute from the destination directory.

The option /f:filespec is required if the source contains more than one file.

This option permits wildcard characters. The /y switch disables the overwrite confirmation prompt.

The /d switch specifies that the files will not be expanded and displays a directory of the files in the source.

Fixboot - Writes a new startup sector on the system partition

Fixmbr - Repairs the startup partition's master boot code. The variable device is an optional name that specifies the device

that requires a new Master Boot Record. Omit this variable when the target is the startup device.

Format -

Formats a disk. The /q switch performs a quick format. The /fs switch specifies the file system.

Help - If you do not use the command variable to specify a command, help lists all the commands that the Recovery Console supports.

Listsvc - Displays all available services and drivers on the computer.

Logon - Displays detected installations of Windows and requests the local Administrator password for those installations.

Use this command to move to another installation or subdirectory.

Map - Displays currently active device mappings. Include the arc option to specify the use of Advanced RISC Computing (ARC) paths

(the format for Boot.ini) instead of Windows device paths.

MD - (Mkdir) Creates a directory. Operates only within the system directories of the current Windows installation,

removable media, the root directory of any hard disk partition, or the local installation sources.

More/Type - Displays the specified text file on screen. More will display a text file one page at a time,

while Type displays the entire text file at once.

Rd - (Rmdir) Removes a directory. Operates only within the system directories of the current Windows installation

, removable media, the root directory of any hard disk partition, or the local installation sources.

Ren - (Rename) Rename a file or directory. Operates only within the system directories of the current Windows installation,

removable media, the root directory of any hard disk partition, or the local installation sources.

You cannot specify a new drive or path as the target.

Set - Displays and sets the Recovery Console environment variables.

Systemroot - Sets the current directory to %SystemRoot%.

(untuk buang recovery console kat hard drive ikut arahan nih)

Deleting the Recovery Console

Warning: To remove the Recovery Console you need to modify the Boot.ini file. Modifying this file incorrectly can prevent your computer from starting properly. Please only attempt this step if you feel comfortable doing this.

To remove the Recovery Console from your hard drive follow these steps:

1. Double-click on My Computer and then double-click on the drive you installed the Recovery Console (usually the C: drive).

2. Click on the Tools menu and select Folder Options.

3. Click on the View tab.

4. Select Show hidden files and folders and uncheck Hide protected operating system files.

5. Press the OK button.

6. Now at the root folder delete the Cmdcons folder and the Cmldr file.

7. At the root folder, right-click the Boot.ini file, and then click Properties.

8. Click to clear the Read-only check box, and then click the OK button.

9. Click on Start, then Run and type Notepad.exe c:\boot.ini in the Open: field and press the OK button.

10. Remove the entry for the Recovery Console. It will look similar to this:

C:\cmdcons\bootsect.dat="Microsoft Windows Recovery Console" /cmdcons

Make sure you only delete that one entry.

11. When you are done, close the notepad and save when it asks.

12. Right click again on the boot.ini file and select Properties.

13. Put a checkmark back in the Read-only checkbox and then press the OK button.

The recovery console should now be removed from your system.

p/s - nasihat den klu tak paham guno recovery console kat hard drive just guno cd windows jo sonang...tp klu nak cubo gak ok.....tak paham bgtau den

lg satu klu tak tau nak bc log combofix nih just paste kan nnt den semakkan

Edited October 8, 2008 by ashton

[fazrin2211 0]

[quote name='ashton' date='08 October 2008 - 01:36 AM' timestamp='1223400988' post='814358']
<!--quoteo(post=812020:date=Oct 4 2008, 10:03 PM:name=lumpy®)--><div class='quotetop'>QUOTE(lumpy® @ Oct 4 2008, 10:03 PM) <a href="index.php?act=findpost&pid=812020"><{POST_SNAPBACK}></a></div><div class='quotemain'><!--quotec-->tau x ape tu kegunaan combo fix?jangan main2 kalu xpandai guna....


to TS,dah update windows?<!--QuoteEnd--></div><!--QuoteEEnd-->


alo bro den takkan bg solution nih klu den tak ponah guna...takdo pekdahnye nak suko-suko....baek den g maen kat funfair...he,..he..hee..untuk pengetahuan ekau kegunaan combofix nih peralatan khas yang digunakan untuk remove malware virus yg singgah kat dlm pc kito...n membantu remove malware yg di scan kat hijackthis bg yg was-was untuk fix checked...tp mmg klu pasai system 32 combofix nih mmg bleh pki.....

p/s:-den hanya bg pendapat bg yang memerlukan jawapan*
[/quote]


betul tu bro, combofix ni byk sangat membantu, tapi kalau org tak percaya, biarkan je la...nak tolong pun susah org camni

[anakberudu 13]

rasanye Tu masalah network.. cc tempt saya buat pun kadang2 jadi gak benda tuh.. caranye chek Ip, kalau tak ok gak Format jek jawapnyer.. slalunyer lepas format memang ok.. eheks..

[botax9 0]

some of the file has corrupted bcoz of malware or virus, im agree combo fix to remove malware virus. benda ni tak famous mcm other antivirus sebab tu some of the people dia takut nak install coz this file format .exe.