Jump to content
chemb

Streamyx

Recommended Posts

aku nak mintak tolong kat korang sume yang lebih advance dalam bab² setting router mode nih... aku dah try kat umah aku. tapi tak jadi.. mase kali pertama aku set n restart, internet dapat connect sekejap je pastu no connection.. nape ekk??

aku set masuk kat 192.168.1.1

pastu aku g kat ATM VC : aku dah set Vci=35, Vpi=0

pastu aku set kat PPP : sume standart kecuali DNS=enable, DHCP=disable

btul ke ape yang aku set tu..

thanks...

Share this post


Link to post
Share on other sites

dah ikut cara ni?.

1) open up your explorer and type in http://192.168.1.1

2) Enter ZXDSL for username and password to enter the built in management console.

3) When the console appears, select WAN folder

4) then click ATM VC link. Make sure interface aal5-2 VPI = 0 & VCI = 35, MUX = LLC, Max proto = 2 .

5) THen click on PPP link. THere should be no entry here... default setting lah. Click the add button below.. and tada... new window appears

6) This are the seetings i used. ppp interface = 0 ATM VC = aal5-2, protocol = PPoE, use DNS = enable, security = PAP and enter yourusername@streamyx as login name and the password is your chosed password lah.

7) Click submit. and Follow on screen instructions

Select Admin, click on commit & reboot link

9) Choose reboot from last configuration as reboot mode.

10) Click on commit button and then reboot buttoon . Commit will save the change in a temporary RAM. so u can try it out.. but if u off the ZTE, all changes will be lost. Reboot will save permanently in a flash ROM.

should be no problem after u have done all the step correctly..

*ayat di atas aku ambik dari URL Ni..My PDA Cafe

kalau tak sesuai..masih lagi problem..better using manual dialer la..

Edited by iskandariah45

Share this post


Link to post
Share on other sites

dah ikut cara ni?.

1) open up your explorer and type in http://192.168.1.1

2) Enter ZXDSL for username and password to enter the built in management console.

3) When the console appears, select WAN folder

4) then click ATM VC link. Make sure interface aal5-2 VPI = 0 & VCI = 35, MUX = LLC, Max proto = 2 .

5) THen click on PPP link. THere should be no entry here... default setting lah. Click the add button below.. and tada... new window appears

6) This are the seetings i used. ppp interface = 0 ATM VC = aal5-2, protocol = PPoE, use DNS = enable, security = PAP and enter yourusername@streamyx as login name and the password is your chosed password lah.

7) Click submit. and Follow on screen instructions

Select Admin, click on commit & reboot link

9) Choose reboot from last configuration as reboot mode.

10) Click on commit button and then reboot buttoon . Commit will save the change in a temporary RAM. so u can try it out.. but if u off the ZTE, all changes will be lost. Reboot will save permanently in a flash ROM.

should be no problem after u have done all the step correctly..

*ayat di atas aku ambik dari URL Ni..My PDA Cafe

kalau tak sesuai..masih lagi problem..better using manual dialer la..

1)ayat diatas semua boleh pakai tapi skip instruction no. 4.pasal modem zte (new firmware) dah tak payah nak usik semua tu.yg lain tu ko ikut je.confirm boleh.kalau tak boleh gak make sure dsl light tu tak blinking.kalau blinking tu dah citer lain la plak

2)instruction no 6 tu skip kat "ppp interface = 0 ATM VC = aal5-2:". ko terus ikut "protocol = PPoE, use DNS = enable, security = PAP and enter yourusername@streamyx as login name and the password is your chosed password lah." sebab setting yg tadi utk modem firmware lae punye.

sekian

Share this post


Link to post
Share on other sites

ohhh, tin kiu kepada sume.. setelah aku mencari² solution yang begitu lame.. akhirnya aku telah berjaya menghasilkan auto mode modem aku ni walaupun aku off pc...

thank's a lot bebeh!!~~

Share this post


Link to post
Share on other sites

ohhh, tin kiu kepada sume.. setelah aku mencari² solution yang begitu lame.. akhirnya aku telah berjaya menghasilkan auto mode modem aku ni walaupun aku off pc...

thank's a lot bebeh!!~~

yg tu nama dia router mode

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...