arfaie 15 Report post Posted October 16, 2004 bulih kerr kalu wat dual channel gune ram bebeza......maksud aku PC2700 ngan PC3200......<<---- ni rase nyer cam soklan budak skolah jerkkk.... lagik satu apo kelebihan dual channel tuu.....←guna mobo apa??? kena tgk gak support ker tak dual channel, then better angkut sama speed lagik baik sama brand ngan chipset.... baru jadik dualnya Quote Share this post Link to post Share on other sites
2die4 0 Report post Posted October 16, 2004 guna mobo apa??? kena tgk gak support ker tak dual channel, then better angkut sama speed lagik baik sama brand ngan chipset.... baru jadik dualnya←aku pakai ACER nyerr mobo <dpt underwater mobo> veriton 7600g nyer mobo...pastu ado 4 DDR DIMM soket - ado 2+2 ler...(ni kire dual channel ker dak)....apo lagik arr...aku nak bagik tau.....then dia support until pc3200......dlm manual dio ado cakap volts dio - should work under 2.5volts....ni std volt kerr....tu ajo lah......apo lagik korang nak tau.....pasai aku ni baru jerk nak try/blaja pasai dual channel.... Quote Share this post Link to post Share on other sites
2die4 0 Report post Posted October 16, 2004 ehh lupo lakss..... aku tanye ni pasai.....aku ado rampc2700 ngan pc3200.....sebab tu lerr aku nak tanya.......bulih apply kerr dak.....kalu bulih apply aku nak try lerrr.....neway......thanks sebab korang bleh tulung aku...... Quote Share this post Link to post Share on other sites
shinnosuke 0 Report post Posted October 16, 2004 ehh lupo lakss..... aku tanye ni pasai.....aku ado rampc2700 ngan pc3200.....sebab tu lerr aku nak tanya.......bulih apply kerr dak.....kalu bulih apply aku nak try lerrr.....neway......thanks sebab korang bleh tulung aku......←uih .. dah ada nape tak cuba ?.. bagitau le keputusan kat sini.. kemungkinan besar boleh .. cuma masalah keserasian sahaja .. dan pastinya satu ram tu kena downclock atau overclock.. Quote Share this post Link to post Share on other sites
arfaie 15 Report post Posted October 16, 2004 uih .. dah ada nape tak cuba ?.. bagitau le keputusan kat sini.. kemungkinan besar boleh .. cuma masalah keserasian sahaja .. dan pastinya satu ram tu kena downclock atau overclock..←hah betul kata shin tue... yg 3200 tue kenala turun pi 2700 sama cam geng dia yg satu lagik tue Quote Share this post Link to post Share on other sites
mus3na 5 Report post Posted October 16, 2004 (edited) Dual Channel ni maknanye memory controller tu leh access 2 bank serentak. kalau dalam single channel, bile memory controller access bank 0, bank 1 idle. tapi dalam dual channel, memory controller leh access bank 0 and bank 1 serentak.Consept paling senang nak paham, Single Channel = Jalan satu lorong, and Dual Channel = jalan 2 lorong. <-- ni tak tepat, tapi membantu kau nak paham consept.----------EDIT----------lupo lak, pasal PC 2700 and PC 3500 tu, tarrak hal, kalau mobo support. but kesemua mobo yg aku jumpa tak support difference freq in difference bank. maknanye ram pc3500 tu akan run at pc2700 nye speed. Edited October 16, 2004 by mus3na Quote Share this post Link to post Share on other sites
2die4 0 Report post Posted October 16, 2004 shinnosuke:keputusan apo yg nak aku bagik tau......ok arr....aku try.....heheheee....tima kasih sebab nulun aku paham mender dual channel nie......aku ni bukan nyer terer/paham sgt concept dual channel.....sebab ni lerr first time aku nak try dual channel nie.....skang ni baru lerr nampak sikit pasai mender niee..................TIMA KASIH ........semuo....... Quote Share this post Link to post Share on other sites
athlonium 0 Report post Posted October 16, 2004 kenapa tak pakai RDRAM...hahah ...kisah lama Intel... Quote Share this post Link to post Share on other sites
sarge 1 Report post Posted October 17, 2004 kenapa tak pakai RDRAM...hahah ...kisah lama Intel...←MUS pakai RDRAM tu Quote Share this post Link to post Share on other sites
zer0Nehza 7 Report post Posted October 17, 2004 RDRAM konfom dual cenel..lab kolej akuh RDRAM lg lol + 2.4 P4..mmg besh buat programming!..hehehe Quote Share this post Link to post Share on other sites
athlonium 0 Report post Posted October 17, 2004 mmg arr...RDRAM is best performance with Intel...but harga mahal...so technology kira dah ditinggalkan gak...400Mhz (100 x 4) Quad Pumped FSB pada asalnya untuk dirunkan dgn RDRAM...then terpaksa guna DDR...apa lagi slow arr...hhehe.e..dah la Quad Pumped secara teori je...actual FSB still 100Mhz... Quote Share this post Link to post Share on other sites
sarge 1 Report post Posted October 17, 2004 ni cth ram single dan dual cenel.test kat pc aku.mobo ; abit nf7-s rev 2.0bios ; D26 mantarays XT cap pak TICTACram; 2 x 512 rambo (Hynix BT-J pc2700 @ 410MHz) + 256mb Kingston (Winbond CH-5 pc3200 @ 410MHz)aku gune 2 x 512 rambo.pasang kat dimm 1 ngan 2Single aku gune 3 keping ram.pasang kat tiga2 slotDual** aku dah test yg 2 x 512mb tu.bile masuk kat 3+ 1 @ 2 blh.tapi bile 1+2 jadik singleade sape2 blh test gune 2 x 512 gune slot 1+2 tak?? Quote Share this post Link to post Share on other sites
2die4 0 Report post Posted October 17, 2004 aku dah test yg 2 x 512mb tu.bile masuk kat 3+ 1 @ 2 blh.tapi bile 1+2 jadik singlesarge tu kalu tak salah aku mmg betoi lerr kalu masuk ram kat slot 1 ngan 3 = dual ......kalu masuk 1 + 2 = single......<----kalu salah tulun betoi kan ler.....aku ni pong kan nyer paham sgt.......yg pasai aku nyerr nii.....mmg aku tgh ponin....aku pasang ram pc2700 kat slot 1 + pc3200 kat slot 3.....but dio just run single.....ker mobo aku yg tak support dual channel...... Quote Share this post Link to post Share on other sites
smile4me 1 Report post Posted October 17, 2004 mobo NF7-S bole buat dua chanel even ko pakai 3 slot.. Quote Share this post Link to post Share on other sites
athlonium 0 Report post Posted October 17, 2004 yeke...aku rasa tak jadi kalau pakai 3 slot...dia kena in pair baru dual channel... Quote Share this post Link to post Share on other sites
smile4me 1 Report post Posted October 17, 2004 abis tu yg si sarge bagi screenie psl dual channel,camne plak?takkan tipu kot.. no offense Quote Share this post Link to post Share on other sites
mus3na 5 Report post Posted October 18, 2004 dual channel mobo kalau kau nak sumbat singgle dimm, kena pasang dummy dim tu, apo tah nama dia. Quote Share this post Link to post Share on other sites
overclocker11 0 Report post Posted October 18, 2004 3 slot still leh buat dual channel.. Quote Share this post Link to post Share on other sites
sarge 1 Report post Posted October 18, 2004 (edited) lorr...takkan la korang tak penah jumpe aku post s/shot sblm2 ni??sblm ni aku penah test;1. 2 x 256mb kingston CH-5 pc3200 + 1 256mb apacer pc32002. 2 x 256mb kingston CH-5 pc3200 256mb + 1 256mb kingmax pc21003. 2 x 256mb pc3200 kingston CH-5 + 512mb kingston D-43 pc 32004. 2 x 256mb pc3200 kingston CH-5 + 512mb RAmbo BT-J pc 2700sume pair kat atas tu blh run dual cenel.smlm aku pinjam ram member abang aku.saje2 test.result die kat atas tu la..mule2 masuk 2 x 512mb BT-J kat slot 1+2.CH-5 tetap kat slot 3.pc tak idupaku pun tukar slot masuk 1+2.pc OK tapi detect single.so aku pun masuk kat slot 2+3 dan 1+3.detect dual cenel.tapi yg tu aku tak amik s/shot la.malas nak tunggu sampai masuk windows.pastu aku masukkan balik CH-5 kat slot 2.sampai skang ni laa..detect dual cenel.pasal NF7-S ni blh support dual cenel even guna tiga2 slot dan gune ram DDR400 ni dah lama aku tahu+guna Edited October 18, 2004 by sarge Quote Share this post Link to post Share on other sites
strontium_bismuth 0 Report post Posted October 18, 2004 sarge , biasa nya untuk mob yang ada 4 slot (DC) , kalau nak jadikan dia DC , kena letak kat slot 1 dan 3 , 2 dan 3 , 1 dan 4 , 2 dan 4 ke ? Kalau letak 1dan2 , 3dan4 , dia jadi single channel ? Quote Share this post Link to post Share on other sites
strontium_bismuth 0 Report post Posted October 18, 2004 (edited) adeh terpaste 2 kali .. sorry Edited October 18, 2004 by strontium_bismuth Quote Share this post Link to post Share on other sites
sarge 1 Report post Posted October 18, 2004 ram ko baper keping??bagi details skit.pakai mobo ape?? Quote Share this post Link to post Share on other sites
2die4 0 Report post Posted October 18, 2004 nengok mobo gak.....cam aku niee.....aku masuk 1 + 3=single.......haahahhaaa......gilo jak aku dibuatnyoo......takkpon mobo aku yg idak support dual channel pc3200....pasai aku masukkan ram aku pc2700 ngan pc3200......tak tau lerr akuu...... Quote Share this post Link to post Share on other sites
strontium_bismuth 0 Report post Posted October 18, 2004 ram ko baper keping??bagi details skit.pakai mobo ape??←ram ada 3 keping , 2* 256MB Kingston CH-5 PC3200 ngan 1* Apacer 256MB PC2700 ...Mobo : Asus P4P800 Quote Share this post Link to post Share on other sites
smile4me 1 Report post Posted October 18, 2004 klu 1+3 kene due² same jenis..klu satu pc2700 dan satu lagi pc3200,mmg la die detect single channel.. Quote Share this post Link to post Share on other sites
